We have heard many people asking the same question from professionals.
“Do faucet covers work for outdoor faucets?”. Well, the answer to this question is, yes! When you cover the pipes and seals correctly, it’s possible to prevent them from freezing and getting damaged.
Because when the temperature gets low, pipes and sewer systems get freeze and burst. But when you install an external faucet cover, you can easily avoid this from happening. It would also prevent air and heat from escaping.
When you have to prepare your house for the cold season, it’s best to cover the faucets before the first frost hits. When temperate drops in some particular areas, the use of faucet covers becomes essential as they can keep the outdoor pipes from being damaged and frosted.
Here we are going to tell you about the installation of different faucet covers so you can follow the method according to your needs.
Different Types of Faucets Covers
Wondering how many types of faucets covers exist? There are plenty of types of faucets covers. Some of them are mentioned below:
- Outdoor Faucet Covers:
If you have an outdoor faucet, make sure you follow the same technique to keep it safe from freezing and bursting.
When it comes to installing an exterior faucet cover, it’s better to combine the process with basic winterizing procedures as they are intended to exclude plenty of water from the system so that there is no water retained in the spigot to freeze.
Even if your insulated faucet cover is resistant to frost, then it will still cover it in the colder months since the faucet is not entirely frost resistant. All the frost-free spigots feature rubber gaskets as well as washers, which gets benefit from having additional protection from the frost-free spigots.
- Insulated Faucet Covers:
Insulated faucet covers are frequently used by many people in the US. They are made of Styrofoam that helps protect your outdoor faucet from when the temperature gets lower.
However, these faucet covers are not as efficient as others when the temperature drops below zero degrees Celsius.
- Styrofoam Faucet Cover:
When the temperature is extremely cold, your outdoor faucet along with other fixtures becomes more prone to freezing as well as bursting during the colder months. If the faucet is present outside the house in the open air, then it is more likely to get damaged due to frozen pipes and the sewer system.
However, if the rupture doesn’t occur, then water may seep into your house and cause hundreds of dollars of damage. Especially if you are in a northern location, then it is common for pipes to burst while you are enjoying vacations with your family at some other destination. As a result, you may see a very unexpected surprise upon your arrival.
Therefore, Styrofoam faucet covers are essential as they can help stop bursting and damaging pipes due to their hard and sustainable material.
- Indoor Faucet Cover:
If the temperature drops below freezing and remains colder for a few weeks or months, then it’s important to drip your indoor faucets and open all the kitchen and bathroom cabinets. If you see that water is still flowing through the pipes, then it means they are not frozen.
It’s recommended to allow the warm air to reach the internal lines by opening the doors open. It will help prevent pipes from getting frozen.
- Hose Faucet Cover:
Hose faucet covers are an incredible option to keep your faucets secure from freezing and bursting. To increase the size of the cable, you can connect it over the handle of the faucet and pull it away from your house. Slide its cable lock against the house until you firmly install the faucet cover. Once you are done, release the latch carefully.
How to Remove and Install a Faucet Cover?
Have a look at the proper steps of removal and installation of a faucet cover.
- Grab a piece of cloth over the head of the adjustable wrench to avoid any kind of damage.
- Let’s unscrew a cap. Make sure you insert the wrench into the lid as well as turn it counterclockwise in the other direction of the cap. It should always work.
- If you want to maintain the finish of the cap, wrap a piece of cloth over the screw-in caps while using the wrench for removing them.
- Notice a bit of dip on the cap’s surface, which will occur where it will join the faucet piece.
- Many pop-off caps will have a depression in the middle area which will be identical to the above part. You can remove the cap by sliding a knife or a screwdriver into the depression.
- Make sure the main water supply is shut off before you start any faucet repair work.
- In some particular faucet designs, you need to unscrew and then remove the handle so you can easily access the cap before reaching it.
- If this cap is rusted to the faucet piece underneath it, apply some lubricant to the joint and then let it sit for a couple of minutes before removing it.
Why Faucet Covers are Necessary to Use?
You should be prepared well before winter arrives, especially if you live in the northeastern United States.
Every outdoor faucet should be active, which means you need to check and see that the overall HVAC system is functioning well and all the fans are existing in the reverse position.
The faucet covers are intended to prevent all the heat that usually escapes from inner pipes and then direct it to the outside spigot from reaching the outdoor spigot. As the lid is insulated properly, it will prevent heat from escaping and keep the water inside from freezing. This will prevent any kind of expansion or breaking of the pipes.
If you are living in a northern region and you have outdoor faucets, then covering them is essential for their care and protection. After all, you don’t want to lose all your hard-earned money on burst and frozen pipes.If you need more help regarding the installation of faucet covers or looking to buy one for your home, then KibiUSA is here to recommend the best option based on your needs and budget. Visit the website and discover all the options for protecting your faucets.